Copterus #1 Autopilot for DJI1.4.1 - App Store
You'll be able to see results in few seconds.
Publisher Description
Autopilot flight app for DJI drones.
Plan and fly automated missions:
- Linear waypoints with in-point actions
- Waypoints with auto heading to POI
- Survey grid and double grid for area 2D/3D mapping
... more info below
Supports almost all DJI drones (see full list below). Mini 2 is not supported.
* Icing on the Сake *
- No ads
- No logins and signups
- No subscriptions
- No extra feature unlocks
- Unlimited missions to plan, save and fly
- Unlimited drones and batteries to save and monitor
- Easy safety settings
- Seamless data sync between all your iOS devices using iCloud
* Supported DJI Drones *
- Spark
- Mavic Mini 1
- Mini SE, Mini 2
- Mavic Air, Air 2, Air 2S
- Mavic Pro, 2 Pro, Zoom, Enterprise
- Phantom 4 Standard, Advanced, Pro, Pro V2, RTK, Multispectral
- Inspire V.1 (Pro, RAW), V.2
- Matrice 100, 200, 200 V2, 210, 210 V2, 210 RTK, 210 RTK V2, 300 RTK, 600, 600 Pro
- Flight controllers: A3, N3
- Agras with A3 controller
* Supported DJI Cameras *
DJI Zenmuse X3, X4 S, X5, X5 R, X5 S, X7, XT, XT S, XT2, Z3, Z30, H20, HT20
* IMPORTANT! *
Before takeoff, make sure your planned flight path is free of any obstacles. Especially if you fly a drone without/disabled vision system or at night.
What's inside:
* Area Mapping *
Survey missions for 2D orthophoto and 3D area reconstruction. Draw custom polygon, set altitude, tune front and side overlaps and you are ready to fly with just one tap.
Use Copterus app to capture aerial images. Then process them with your favorite photogrammetry software (Metashape Pro, WebODM, Pix4D, Drone Deploy, MapsMadeEasy, SimActive etc) to get orthomosaic maps, digital terrain and elevation models (DTM, DEM).
- Follow terrain feature
- Automatic flight planning based on camera parameters, overlaps and altitude
- Estimates for GSD, flight time, number of photos and batteries
- Multiple flights for massive areas
- Custom start/finish positions
- Pause mission and move backwards to retake some photos
- Automatic takeoff or start mission after manual takeoff
- Plan beforehand and try any DJI drone and camera to fit your mission
- Land, hover or return after flight
- Go Home on connection loss or continue mission (Spark, Mini and Air 2 do not support connectionless mode)
* Waypoints Mission *
For smooth and repeatable time-lapse videos and photos (even seasonal time-lapse), photo reports from the same exact positions, search and rescue operations, aerial monitoring and video surveillance.
Tap desired locations to draw a flight path. Set common mission params, then tune points' altitude, heading, gimbal position and add some actions.
- In-point actions: wait, take photo, start/stop video, rotate aircraft (yaw), set gimbal angle. Up to 15 in each waypoint)
- Round-repeat waypoint actions up to 15 times
- Custom actions timeout
- Point-to-point or curved flight path with adjustable turn radius near each point
- Ability to control drone's speed with RC joystick during automated flight
- Set autospeed to 0 and move drone with RC joystick along its planned path - just like a cable camera
- Auto-repeat mission up to 15 times
- Go Home on connection loss or continue mission (Spark, Mini and Air 2 do not support this mode)
* POI Mission *
- Add point of interest (POI) to waypoint mission for auto heading
* KML Import *
- Create mapping or waypoint mission from KML polygon or line respectively
- One file can contain multiple KML features, choose one on import
* Drones and Batteries Management *
- All system states and info, errors and warnings
- Batteries health info. Checked and saved on each connection, available anytime
- Multi-battery support
- Save your drones and batteries to track state
* Weather and Sun *
- Hourly weather forecast with wind warnings
- Sunrise and sunset time
Check Copterus app website for more info: copterus.app
Feel free to send your questions or requests:
support@copterus.app
Version History Fixed some errors 1.4.1 07/10/2023 bug fixes 1.4.0 05/14/2023 - Support for Air 2S, Mini SE, Mini 2
- Terrain follow for mapping missions
- Overall app improvements 1.3.0 04/15/2023 Some bug fixes 1.2.1 05/14/2021 Hi pilots!
This update brings some great features. It is mostly based on your feedback, thank you!
- 3D preview for missions and flights (In-flight 3D drone preview and terrain follow feature are coming soon).
- More adjustable parameters for mapping mission, such as speed, gimbal pitch and heading mode.
- Ability to switch off taking photos in mapping mission (just fly).
- Export/import missions to/from simple text JSON files.
- Completely redesigned mission editors.
- Ability to fly missions in virtual stick mode for those drones which support regular mission functionality and disables it when flying in specially unlocked restricted zones. Please first check your local airspace rules if you are allowed to do so.
- Overall UI improvements and bug fixes.
Feel free to get in touch: support@copterus.app 1.2.0 04/30/2021 - Mavic Air 2 is finally supported
- Mavic Mini, Air 2 and Spark can fly automated missions (RC-connectionless mode is not supported)
- Mission execution can be paused with a single press of Home button on your RC
- Mission execution can be stopped by switching flight mode on your RC
- Onscreen flight mode switch for Mavic Mini
- KML import: create linear waypoint and mapping missions from lines and polygons
- Bug fixes, overall UI improvements 1.1.0 01/31/2021 Some bug fixes and improvements 1.0.1 11/30/2020 1.0.0 09/22/2020
About Copterus #1 Autopilot for DJI
The company that develops Copterus #1 Autopilot for DJI is Nikolay Leshchikov. The latest version released by its developer is 1.4.1.
To install Copterus #1 Autopilot for DJI on your iOS device, just click the green Continue To App button above to start the installation process. The app is listed on our website since 2026-10-14 and was downloaded 0 times. We have already checked if the download link is safe, however for your own protection we recommend that you scan the downloaded app with your antivirus. Your antivirus may detect the Copterus #1 Autopilot for DJI as malware if the download link is broken.
How to install Copterus #1 Autopilot for DJI on your iOS device:
- Click on the Continue To App button on our website. This will redirect you to the App Store.
- Once the Copterus #1 Autopilot for DJI is shown in the iTunes listing of your iOS device, you can start its download and installation. Tap on the GET button to the right of the app to start downloading it.
- If you are not logged-in the iOS appstore app, you'll be prompted for your your Apple ID and/or password.
- After Copterus #1 Autopilot for DJI is downloaded, you'll see an INSTALL button to the right. Tap on it to start the actual installation of the iOS app.
- Once installation is finished you can tap on the OPEN button to start it. Its icon will also be added to your device home screen.
Program Details
System requirements
Download information
Pricing
Version History
version 1.4.1
posted on 2026-10-14
Version History Fixed some errors 1.4.1 07/10/2023 bug fixes 1.4.0 05/14/2023 - Support for Air 2S, Mini SE, Mini 2
- Terrain follow for mapping missions
- Overall app improvements 1.3.0 04/15/2023 Some bug fixes 1.2.1 05/14/2021 Hi pilots!
This update brings some great features. It is mostly based on your feedback, thank you!
- 3D preview for missions and flights (In-flight 3D drone preview and terrain follow feature are coming soon).
- More adjustable parameters for mapping mission, such as speed, gimbal pitch and heading mode.
- Ability to switch off taking photos in mapping mission (just fly).
- Export/import missions to/from simple text JSON files.
- Completely redesigned mission editors.
- Ability to fly missions in virtual stick mode for those drones which support regular mission functionality and disables it when flying in specially unlocked restricted zones. Please first check your local airspace rules if you are allowed to do so.
- Overall UI improvements and bug fixes.
Feel free to get in touch: support@copterus.app 1.2.0 04/30/2021 - Mavic Air 2 is finally supported
- Mavic Mini, Air 2 and Spark can fly automated missions (RC-connectionless mode is not supported)
- Mission execution can be paused with a single press of Home button on your RC
- Mission execution can be stopped by switching flight mode on your RC
- Onscreen flight mode switch for Mavic Mini
- KML import: create linear waypoint and mapping missions from lines and polygons
- Bug fixes, overall UI improvements 1.1.0 01/31/2021 Some bug fixes and improvements 1.0.1 11/30/2020 1.0.0 09/22/2020
version 1.4.1
posted on 2023-07-10
Jul 10, 2023
Version 1.4.1
Fixed some errors
version 1.4.1
posted on 2023-07-10
Fixed some errors
version 1.4.0
posted on 2023-05-14
May 14, 2023
Version 1.4.0
bug fixes
version 1.3.0
posted on 2023-04-15
Apr 15, 2023
Version 1.3.0
- Support for Air 2S, Mini SE, Mini 2
- Terrain follow for mapping missions
- Overall app improvements
version 1.2.1
posted on 2021-05-14
May 14, 2021 Version 1.2.1
Some bug fixes
Disclaimer
Official App Store Link
We do not host Copterus #1 Autopilot for DJI on our servers. We did not scan it for viruses, adware, spyware or other type of malware. This app is hosted by Apple and passed their terms and conditions to be listed there. We recommend caution when installing it.
The App Store link for Copterus #1 Autopilot for DJI is provided to you by apps112.com without any warranties, representations or guarantees of any kind, so access it at your own risk.
If you have questions regarding this particular app contact the publisher directly. For questions about the functionalities of apps112.com contact us.



